End‑to‑End Supply:FeSi to Bangladesh steel plant

Every step is documented with real images and independent inspection. See how we turned a specification into a success story.

Challenge at BSRM Steel

BSRM needed ferrosilicon with ≥70% Si, ≤0.05% S & P for consistent high‑grade billet production. Previous suppliers caused unstable quality and higher consumption.

  • Inconsistent silicon content → unpredictable deoxidation
  • High sulfur/phosphorus → more rejects & lower mechanical properties
  • Frequent additive adjustments → wasted alloy & energy

✅ Our solution: high‑purity FeSi

Supplied ferrosilicon (10‑50mm) with SGS certificate:

Silicon (Si) 72.5% >70% req.
Sulfur (S) 0.003% req. ≤0.05%
Phosphorus (P) 0.025% req. ≤0.05%
Size 10‑50mm (90% min)

⚡ Real impact: lower cost, higher quality

-12%
alloy cost per ton of steel
+8%
billet yield (less rejects)
-22%
sulfur-related inclusions
+15%
faster deoxidation

⚡ Performance that matters

✅ Si 72.54% (vs spec 70% min) ✅ S 0.003% (vs ≤0.05%) ✅ P 0.025% (vs ≤0.05%) ✅ SGS certified
Step 1/6

Material Preparation

We selected high‑purity FeSi 75% lumps (10‑50mm) from our Anyang warehouse. Each batch is pre‑screened and homogenized to ensure uniformity.

🔍 Client requirement: Si ≥70%, S/P ≤0.05%
📊 Our internal check: Si 72.86%, S 0.003%, P 0.025%
FeSi lumps appearance
📦 FeSi 72%+ lumps, size 10-50mm
Step 2/6

Custom Packing

Customized shipping marks are provided to facilitate smooth customs clearance and compliance at the destination port.

ready ferrosilicon 72% goods with customized packing in warehouse
⚓ Customzied Package Shipping Mark
Step 3/6

SGS On‑Site Sampling

Independent SGS inspectors attended our warehouse, took composite samples from the prepared lot, and sealed them in the presence of our team.

SGS inspector sampling
🔬 SGS inspector collecting samples
Step 4/6

SGS Certificate Issued

The samples were analyzed in SGS lab. The official certificate confirmed: Si = 72.85% (above 70%), S = 0.003%, P = 0.025%. All parameters far exceed client specs.

SGS certificate closeup
📋 SGS certificate – Si 72.85%, S 0.003%
Step 5/6

Container Loading

Containers were shipped from Tianjin port to Chittagong, Bangladesh. The voyage took 18 days; all documents (BL, SGS, packing list) were sent in advance for smooth clearance.

Loading FeSi into container
🚛 Bags Were Loaded In Containers
Step 6/6

Shipping to Chittagong

First-tier shipping companies issue master bills of lading to ensure that goods are delivered to customers quickly and safely.

bill of lading
🚛 Bill Of Lading Sent Immediately

📊 The numbers that count

2.5%
extra Si above spec
94%
lower sulfur
50%
lower phosphorus
$2.8/t
savings reported
“The ferrosilicon from Bright Alloys exceeded our quality expectations. Consistent high silicon and low impurities helped us reduce additive usage and improve final steel quality.”
— Procurement Manager

Consistent quality = Predictable savings

This Bangladesh case proves: when you order from Bright Alloys, you receive material well above specification. Our tight process control, independent SGS checks, and transparent documentation let you focus on making better steel — at lower cost. Join our 100+ satisfied clients.

Request a similar quote View FeSi specs

Why global mills like BSRM trust us

🔬
Every batch SGS/BV tested
📋
Original mill + third‑party reports
🌍
20+ countries · 100+ clients
💳
L/C, T/T, flexible terms

Get the same quality trusted by BSRM Steel

Request a quote + free SGS report sample for your next order.

📬 Contact sales

Online Chat

Lily
Hello! How can i assist you today?
WhatsApp us now! Call us now! Email us now! Wechat